weight loss

Decorative hair bands with your own hands. How to sew an elastic band for hair (detailed master class)

There are a large number of a wide variety of hair bands on sale, but it is much more interesting to make this accessory with your own hands, and besides, this will allow you to take into account all individual preferences and make sure that it is in harmony with a certain style.

The manufacturing process is quite simple and anyone can handle it, even without skills in the field of needlework, but first you need to make sure that everything you need is available.

The minimum list of tools and materials is given below:

an elastic band with a small thickness or a piece of clothesline about 15-20 cm long, which will be required to make the base;
colored fabric. The width does not really matter, but the length should be several times greater than that of the finished product;
a set of threads that match the color of the selected fabric;
needle;
scissors;
pin;
beads or other decorative elements, if they are planned to be used;

How to make a gum base

Regardless of what kind of gum you plan to create with your own hands, you will first need to make the basis for it.

Detailed instructions describing each stage are given below:

It is necessary to take the selected fabric and fold it in half lengthwise.
The folded piece of fabric is sewn along the edge.
The resulting workpiece must be folded in such a way that the holes are opposite each other.
The workpiece is again stitched along the edge, but it is necessary to leave a hole for eversion.
After the done actions, the base must be turned out.
A pre-prepared piece of clothesline or elastic is inserted into the hole.
A rope or elastic band is tied, after which the hole can be sewn up.

The resulting base can be used to make more complex hair bands or used for its intended purpose as a simple model.

A selection of the best workshops for creating rubber bands with your own hands

Gum-flower

The flower-shaped accessory is distinguished not only by its practicality, but also by its visual appeal; this model is one of the most popular options.

The manufacturing process is described below:

A ribbon is cut from a piece of the selected fabric, its width should not exceed 5 cm.
On one side of the tape with scissors, you need to make a pattern that will decorate the petals of the future flower.
A strip of fabric is required to be collected on a thread. This can be done by passing a needle through the opposite edge of the pattern, with a thread inserted into it.
The thread is pulled so that the strip takes the form of a semicircle.
Now you need to cut out a small suede circle, to which a ribbon will be glued around the circumference, which is the future flower.
A large bead, pebble or any other decorative element is glued to the center.
A base is taken, which in any area is torn in length by 1 cm.
The base is glued on the back of the suede circle.
It is necessary to wait until the glue is completely dry, after which the accessory is completely ready.

tissue model

This option is made even easier, but this will require more free time and the ability to use a sewing machine.

Detailed instructions are given below.:

A piece of 10x50 cm is cut out from the selected fabric.
The edges of the segment are folded from the wrong side and stitched along the edges; for these purposes, you will need to use a sewing machine. At this stage, it is necessary to ensure that the indentation is no more than 1 cm.
The fabric is tucked to the middle of the segment. It is necessary to hold it in this position, simultaneously turning its remnants inward, as a result of which the strip will fold in half.
It is necessary to use the sewing machine again to sew the edge from the side of the already sewn part of the workpiece. As this process progresses, it is required to get the inside of the fabric, continuing to stitch the edge.
It is necessary to stop when at least 3 cm remains before the beginning of the stitch, this hole must be saved, otherwise at later stages it will not be possible to insert the elastic.
All fabrics are hand-turned right side out.
An elastic band is threaded through the hole left, after which its ends are connected to each other.
Now the hole is no longer needed and can be sewn on a sewing machine to ensure the integrity of the accessory.
It remains only to straighten the resulting accessory, after which it is completely ready for use.

Model with petals

Such an accessory is essentially a kind of flower, but a completely different technology is used to make it.

A detailed description of this process is given below:

Initially, you will need to cut out three circles from colored cardboard, which will differ in diameter: the recommended figures are 5cm, 6.5cm and 8cm.
15 circles are cut out of the fabric - 5 for each diameter. To maintain dimensions, it is recommended to apply cardboard blanks to the fabric and cut them along the contour.
Any circle is taken from the fabric and folded in half, then this action must be repeated again.
As a result of the described actions, a petal is obtained, which must be sewn along the edges with a needle forward to fix and maintain the desired shape.
The thread should be long enough, because another 5 petals will be passed through it, which are collected in the same way from the remaining circles with an identical diameter.
Using the described algorithm of actions, you need to get two more flowers, which are collected from the remaining circles with different diameters.
The resulting flowers are stacked in the form of a pyramid: the largest element is located below, on it there is a medium and a small one.
All three flowers are sewn together.
An elastic band is sewn or glued to the largest flower from the bottom.
At the final stage, a bead, a pebble or any other decorative element is glued to the center of a small flower.
It remains only to wait for the glue to dry completely, after which the stylish and attractive accessory is completely ready.

Summing up, we can give the following tips and tricks for the manufacture and use of hair ties:

In the absence of experience in the manufacture of such accessories, it is best to try to make a few basic models. As soon as the appropriate skill is acquired, and this process begins to be carried out without apparent difficulties, you can proceed to the creation of more complex options.
It's best not to spare the fabric, which is used to create an accessory, taking it with a sufficient supply. It is better to have a surplus than to feel a lack of material at the most inopportune moment.
Even before the start of production, it is recommended to sew a small piece of fabric with selected threads. to visually evaluate the combination of colors.
Elastic band can be twisted on the head and thread several invisible hairpins through its loops, which are then pinned to the hair. This is a secret used by professional hairdressers, it allows you to securely fix the position of the elastic on the hair.
Hair band is not the most noticeable accessory, but despite this, it is necessary to ensure that it successfully combines and harmonizes both with the general style and with the features of the chosen clothing.

Evgenia Smirnova

To send light into the depths of the human heart - this is the purpose of the artist

Content

Modern needlewomen make such skillful jewelry that one can only be surprised. They are able to make a hair ornament that will emphasize the beauty of the hairstyle, in several different techniques. Satin ribbons for elastic bands are considered a convenient material, because you can create from them from a flower to a decoration for a beam using simple techniques.

How to make rubber bands from satin ribbons

Craftswomen are able to make rubber bands with their own hands from ribbons in several techniques, which, upon careful consideration, become quite simple. The main thing in this business is to learn the basic skills, follow the schemes and master classes and use your imagination to get a beautiful decoration that is distinguished by its individuality and spectacular appearance.

The basis of the manufacture of elastic bands is the technique of weaving, folding and collecting elements into one large pattern. It is better for beginner craftswomen to take basic skills as a basis, learn them, and then start to complicate. Even simple rubber bands can look spectacular on a girl's hair if they are skillfully decorated. Options for decorating finished products are embroidery, weaving, beads, beads, sequins. You can try a variety of decoration options to make beautiful decorations.

The materials for the manufacture of rubber bands are satin ribbons of different colors and shades, beads, beads, decor elements. Of the auxiliary tools, you will need textile glue, scissors, a glue gun, a fire source (lighter candle) and skillful hands. Sometimes craftswomen take a ready-made rubber band bought in a regular store and decorate it in their own way. In this case, you will need a base where the elements will be attached - cardboard, metal hairpins, plastic crabs.

Elastic bands from ribbons using the kanzashi technique

A well-known technique for creating elastic bands from satin ribbons is the Japanese art of kanzashi. To make a beautiful children's hair accessory that resembles a dahlia or chamomile, girls need to follow the master class:

From a satin or silk cut, make 16 square patches 5 * 5 cm in size, run along the edges with a lighter so that the threads do not come out. Repeat for the other color (inner petals).
For the outer row of petals, bend each square diagonally, repeat, fire over the corner. For the inner row of petals, the squares are bent diagonally three times.
Fold the smaller workpiece inside the large one, glue it.
Make 12 single-layer blanks for additional decoration.
From thick cardboard cut out 2 circles with a diameter of 3.5 cm and 2.5 cm, glue over with a cloth.
Glue each two-layer petal to a large base in a circle. Repeat for the second tier. Glue single-layer petals to a smaller base. Glue 2 bases together.
Decorate with beads, glue the resulting flower on a hairpin or crab.

Elastic bands for hair from ribbons of different widths

Do-it-yourself rubber bands from satin ribbons, made of material of different widths, are spectacular and voluminous. There is a master class for making an accessory:

Cut out a rectangular blank 9 * 16 cm from cardboard, draw a horizontal line in the middle. Wrap ribbon around it.
Remove the skein without damaging the coils, stitch the middle, pull it off until a bow is formed.
Repeat the technology for making a bow from a different material and a narrower ribbon.
From a fabric of a contrasting color, cut out pieces of the same length and width as the resulting bow, singe the edges.
Collect all the elements on a string.
Cut out a cardboard circle, cover with a cloth, sew to the rubber band.
Use a glue gun to glue a bow on a circle, decorate with small beads, rhinestones, buttons or pebbles.

Elastic band on a bunch of satin ribbons

To make rubber bands from satin ribbons with your own hands, decorating a bun-bun, girls will need to follow the step-by-step instructions

Cut 6 pieces of green ribbon 4 * 2.5 cm into a dome, singe from 2 sides to create a wave - these will be leaves. Bend the bottom edge in two places, glue in the center to get a concave even part.
Cut 12 pieces of white ribbon 4*2.5 cm and 5 pieces 3.5*2.5 cm in a semicircle, singe, glue into a droplet.
Glue 5 blanks together by overlapping each other, decorate with stamens.
Repeat for 14 rose petals from 4.5 x 2.5 cm pieces.
Round off the first layer of white details, glue the remaining petals, make the second layer around the circle from pink elements. Glue on the leaves.
Make 5 similar blanks.
Bend 4 pink segments 10 * 5 in half, glue the ends with a fold, connect with a bow. Repeat for 2 white blanks 9 * 5 cm.
Fasten 2 white ribbons 8.5 * 5 cm and pink 9 * 5 cm with a white overlay on the pink layer, form a fold, decorate the bottom with beads. Glue the bow, masking the middle.
Glue felt circles with a diameter of 3.5 and 2.5 cm to the back of the bow and flowers, sew all the elements onto the sewn lace elastic. Decorate the bun.

Ribbon bands with bows

Bow decorations look spectacular on the hair, which can be made by following the instructions:

Take 2 ribbons 2.5 and 0.8 cm wide, 1 meter long; 1 ribbon 8 mm wide and 50 cm long.
Make 2 cardboard templates in the form of the letter P, 6 and 8 cm in size, cut off the edge of the wide ribbon along the oblique, lay it on a large template so that the cut and 2 folds are from each edge.
Fasten the ribbon in the center with pins, sew a “needle forward” seam, assemble, fasten.
Repeat for the second bow, sew together, attach a bead in the middle.

Check out the tutorials on how to make.

Do you like original and inexpensive? Then these four master classes on creating stylish hairpins are for you!

Every mother of a little princess has to constantly buy hairpins and scrunchies. They are endlessly torn and stretched, decorative bows come off and lose their attractiveness, and sometimes such important accessories are completely lost. Do not rush to get your wallet, because you can make beautiful hair ties with your own hands from old things. My daughter will be happy with the new thing and will be happy to participate in the process!

To make rubber bands with your own hands, as in the photo, you will need:

sewing elastic or unnecessary accessories;
scissors;
thread with a needle;
scraps of fabric.

Let's look at four examples.

For a budget hair clip from a strictly accessory, fix the edge of the ribbon on a rubber band, as shown in the photo. Gradually sew the ends of the ribbon along the contour of the elastic band and move it so that the hairpin is more voluminous. Finally, sew the two ends of the ribbon together.

For the second example, take a sewing rubber band and a strip of fabric. Fold the fabric in half and sew along the edge. Then thread the elastic inside the fabric and sew the ends, and then connect the ends of the fabric.

In the third example, follow the same steps as in the second option, and at the end decorate with beads strung on a chain. Just wrap the base in a circle and connect the ends of the chain.

In the fourth example, how to make a hair band with your own hands, wrap the base with a strip of fabric, sew the edges and connect the ends of the ribbon. You can complement the accessory with a bow, felt flower or other decor.

As you can see, needlework does not require much time and spending. Masterpieces can be made from nothing, giving life to old things. So do not rush to throw them away!

For those whom nature has awarded with long hair, the question is often acute how to decorate them and diversify their everyday hairstyle. To do this, you can use an elastic band for hair. Of course, you can buy such decoration in the store. But it's not as interesting as if you make such an elastic band yourself. At the same time, various materials can be used as a material at hand: fabric, ribbons, knitting threads, etc.

How to make kanzashi hair bands with your own hands?

Before sewing an elastic band for hair in the form of a flower, you need to prepare the following materials:

cardboard;
scissors;
textile;
needle;
threads;
rubber;
bead.

Hair band - flower: master class

Before you make an elastic band for your hair, prepare the following:

thread;
a needle;
textile;
small suede circle;
scissors;
rivet;
gum;
glue.

Fabric hair band

You can also make a regular gum without flowers. This decoration is easier to make. Although it takes a lot of time. For this

required:
sewing machine;
scissors;
rubber;
fabric measuring 10 by 50 cm.

Creating hair bands is not only exciting, but also interesting. Such a handmade jewelry will make you stand out from the crowd, because no one else will have such an accessory. After all, this is a work of art. And the ability to use different materials to create an elastic band for hair will allow you to diversify your hairstyle.

Who came up with the idea of fixing the hair with an elastic band is not known for certain. But it was definitely a brilliant idea. The life of long-haired beauties immediately became simpler. Accessory allows you to create a huge number of hairstyles. Yes, and just collecting hair in a bun, you can change the image. Decorative elastic will suit the children's hairstyle just right.

The popularity of rubber bands came in the 90s. Accessories of "acid" colors appeared on the market, which immediately fell in love with fashionistas. Many remember the real fashion squeak from the 90s - fur elastic. Of course, today such accessories look archaic, but then there was a real "rubber" boom.

Today, the most popular hair accessories are spiral elastic bands, which look like a telephone wire. "Spirals" fix the strands well, do not damage the hair. But ... they are so monotonous and almost all girls have them. And sometimes you want something special or the image requires accessories with a "zest". Try making your own rubber band. As a result, you will satisfy your creative impulse and get a one-of-a-kind accessory.

If earlier “home-made products” were created due to a shortage or lack of purchasing opportunities, today it is for the sake of satisfying creative impulses, and in order to get something really original.

Elementary Options

If you have never "made" anything, then start with simple options. They can be done in just five minutes. At the same time, they look stylish and original. Provided that you are ready to show imagination. Otherwise, the accessories will turn out with a “naphthalene smell”: ridiculous and outdated.

Fabric "Simple"

What do you need:

linen elastic about 15 cm in size;
a piece of matter (take a piece two or even three times the length of the elastic band);
scissors;
threads;
needle;
pins.

How to do

Fold the piece of fabric in half (lengthwise). Poke around the edges with pins.
Hem the fabric along the hem by hand. If you have a sewing machine, you can use it.
You will get a tube of fabric - turn it inside out. Sew the two ends together, leaving a small opening.
Using a safety pin, thread the elastic into the fabric tube. Stitch the ends together. Or just tie it in a knot.
Neatly overcast the hole through which the linen elastic was inserted. Accessory is ready!

The elastic can be made from denim, velveteen, suede or a piece of cotton. You can leave it concise, or you can decorate it: an accessory with beads or sequins looks beautiful.

"Eared"

What do you need:

textile;
linen gum;
needle;
threads;
scissors;
pin;
wire.

How to do:

Make a simple fabric elastic, as in the previous instructions.
Cut out the "ears" from the fabric. You can make two parts and sew or cut out a solid “ear”, fold in half lengthwise and overcast. Do not sew to the end, leave a small opening.
Pass the wire through the "ears". Sweep a hole.
Pass the "ears" through the fabric circle. Tie them up. Ready!

By the same principle, you can make a headband with ears or a bandage. "Eared" elastic bands are now popular with teenagers: please your daughter or niece with a trendy accessory.

Schemes are more complicated

For several seasons, knitted elastic bands and “Athens” (gum bands for creating hairstyles, like a Greek goddess) have been in trend. To make them, you need to work hard, but the result is worth it.

Crochet

What do you need:

simple gum as a base;
hook;
shiny (or other choice) yarn;
beads, beads.

How to do

Tie the base with a single crochet, the second row with a double crochet.
Decorate the yarn accessory with beads: they are strung in the course of knitting or sewn on.

The openwork accessory looks beautiful. You can use any pattern for knitting napkins. Needlewomen will be able to tie a simple elastic band in just ten minutes.

Wicker "Afinka"

What do you need:

centimeter;
old elastic T-shirt;
scotch;
thread, needle;
scissors.

How to do

Measure the circumference of your head in centimetres. Measure in the place where you plan to wear the accessory (“Athens” are worn on the forehead, in the middle of the head).
Cut out five identical strips from an old T-shirt. The width of the parts is approximately 2 cm, the length is equal to the circumference you measured.
Collect the strips in one bundle, fasten with a knot at the end.
Stick the base with adhesive tape to any surface. This is necessary for the convenience of work.
Braid the stripes into a pigtail. At the end is a knot.
Keep in mind that the finished pigtail is half the size of the strips.
You need to sew the edges with a strip cut from the T-shirt. You can “finish” the pigtail with an ordinary underwear elastic: it will be located at the back, and the Greek hairstyle suggests that the back of the “Athina” is covered with hair.

"Athena" can be done in different ways. The easiest option is to sew a lace ribbon and a linen elastic band. The only difficulty is that you need to take measurements correctly: others should see only the delicate lace on the hair. Of course, this option is only suitable if you plan to wrap the strands around the "athen" and not wear the accessory over your hair.

3 children's accessories

Moms of girls definitely know how to do hairstyles. All these pigtails, ponytails, "Malvinkas" are a joy for little princesses. To make a baby's hair, you need to stock up on rubber bands. In stores you can find so many accessories that your eyes just run up. However, homemade is always unique. And it’s much more pleasant to give it to your daughter than a purchased one: so much love has been invested in it. A baby can also be involved in the creation of elastic bands: spending time together will bring a lot of pleasure. How to sew an elastic band from satin or velvet?

With satin ribbon bow

What do you need:

ribbon;
scissors;
glue gun;
stapler;
thread;
needle;
beads;
regular gum.

How to do

Cut pieces of satin ribbons of different lengths.
Roll the resulting pieces into rings. Glue the ends with a glue gun. You can sew.
Staple the rings together with a stapler, forming a lush multi-layered bow.
Cut off a piece of ribbon and make a fake knot in the middle. Decorate it with beads.
Sew a beautiful element to a regular elastic band: you will surely find it among your accessories. If there is no base, you can replace it with a linen elastic sheathed in fabric.

Another option for a festive accessory is an elastic band in the form of a flower, made of fabric using the Japanese kanzashi technique. If you are not familiar with her, then it is better to pre-watch the training video, practice, and then invite the baby to help with the creative process.

With a foamiran rose

What do you need:

foamiran (special material for needlework);
oil paint;
sponge;
lighter;
foil;
glue gun;
rubber.

How to do

Make a pattern: draw the petals of a future rose on paper. Patterns are shared on the thematic sites of the craftswoman, which will simplify the task if you are making a flower from foamiran for the first time.
Cut out blanks from the material and paint over them.
Fold the flower petal to petal, twist and rub. This is necessary to thin the blanks.
Straighten the flowers. Use a lighter to make folds on the petals.
We fold the rose. To do this, you need to twist the foil ball, put it in the middle of the workpiece, and then twist the petals around it and fix them with a glue gun. You can make a dense bud, or you can make a full-blown rose.
When the flower is ready, fix the green backing at the bottom with a glue gun and glue the elastic.

Foamiran flowers look beautiful on the headbands. They are worn not only by babies, but also by young girls.

With felt figures

What do you need:

multi-colored felt;
scissors;
thread;
needle;
beads;
rubber bands for the base.

How to do

Think about what will decorate the gum. The easiest way is to make a nesting doll, a bird, an apple.
Cut out the silhouette of the figurine and details from the felt.
Overcast the figure, sew the details. Make nesting doll or bird eyes with beads. Beads can also be used simply to add brightness to an accessory.
Sew a felt figure onto the base.

Schoolgirls are unlikely to appreciate the felt funny figures on the accessory - they are too much for kids. But you can come up with options for young fashionistas: make a felt flower or simply cut a circle out of the material, sew it to the base and decorate it with different “glitters”.

And one more life hack: if it seems to you that you can’t master the process of creating an elastic band, but you want to diversify the image with an original hairstyle, cut ... a sock. By cutting off the sock in the heel area and twisting it into a tight roller, you will get an accessory for creating a bun (a homemade “donut”). This hairstyle is adored by schoolgirls, urban fashionistas, stars, and ladies of Balzac age.